[chandler-users] Still having sync problems...

[Andre Mueninghoff]

You want the other one...the tar.gz file.

You can delete the .egg file you downloaded.

Sorry for the many steps. (I was expecting the .egg file to have been
removed...and should be now, in my opinion.)

On Thu, 24 Jan 2008 11:18:26 -0800, "Esther Sun" <esun at kei.com> said:
> Thanks Andre -
> 
> It looks like there are two files I can download - one is  
> "Chandler_debugPlugin-0.2-py2.5.egg" and the other is "Chandler- 
> debugPlugin-0.2.tar.gz" - I'm going to guess I want the first one  
> (egg) for no good reason other than that more folks have downloaded  
> this one... am I right?  If not, I haven't installed it yet, so I can  
> download the other one.  It looks like Firefox decided to save this  
> file as an mpeg - is this ok?
> 
> Esther
> 
> 
> 
> 
> On 24Jan, 2008, at 9:53, Andre Mueninghoff wrote:
> 
> > Ah...I believe you'll need to install the "debug" plugin for that menu
> > option to be available to you.
> >
> > To install the "debug" plugin:
> >
> > Step 1: In Chandler, go to menu option Plugins > Download (this will
> > open a website for you in a separate browser window, that is, separate
> > from your Chandler window)
> >
> > Step 2: In the browser window that was opened in Step 1, from the list
> > of Packages, click on Chandler-debugPlugin to download the debug  
> > plugin
> > file
> >
> > Step 3: After the download completes, in Chandler, go to menu option
> > Plugins > Install and when prompted, select the Chandler-debugPlugin
> > file from where it was saved when it was downloaded in Step 2.
> >
> > Step 4: Give Chandler a few seconds to install the plugin.  :-)
> >
> > Step 5: In Chandler, go to the tools menu, and verify you have the
> > additional menu options such as the GET-only background sync.
> >
> > Hope this does the trick.
> >
> > Andre
> >
> > On Thu, 24 Jan 2008 09:24:32 -0800, "Esther Sun" <esun at kei.com> said:
> >> Hi,
> >>
> >> So the resetting didn't work, and I can't seem to fine the GET-only
> >> option under Tools -> Sharing -- maybe it's different on a mac?  I've
> >> looked around a bit and just can't find it.  Jeffrey, if you're in
> >> today, maybe I can stop by and you can show me where this is?
> >>
> >> Thanks,
> >> Esther
> >>
> >>
> >> On 23Jan, 2008, at 16:26, Andre Mueninghoff wrote:
> >>
> >>> Hi Esther, Hi Jeffrey,
> >>>
> >>> In the last day or so, I have encountered this same error (for the
> >>> first time) on two collections. What worked for me was to select the
> >>> collection that had the sync error (triangle) icon and choose the
> >>> following menu option:
> >>>
> >>> Tools > Sharing > Start a GET-only background sync of current
> >>> collection
> >>>
> >>> I suspect you will see the sync error disappear after the GET-only
> >>> sync completes.
> >>>
> >>> I have had the error recur on the same two collections. A GET-only
> >>> sync has continued to work to fix the problem, (but apparently not
> >>> permanently).
> >>>
> >>> For the dev team...when I get a few extra minutes I'll try and dig
> >>> deeper. Of note, the menu option that usually corrects sync "burps"
> >>> doesn't work for this error condition, namely Tools > Sharing >
> >>> Reset state of shared collection. I suspect some issue with an
> >>> item(s) that are only in both of these two collections.
> >>>
> >>> Please let me know if you have any questions.
> >>>
> >>> -Andre
> >>>
> >>> Esther Sun wrote:
> >>>> Hi Jeffrey,
> >>>>
> >>>> Just making sure you got my repository ok.  Let me know if you need
> >>>> anything else from me or if there is anything I should try to do...
> >>>> at the moment, I'm still getting the error and it doesn't seem to
> >>>> want to sync.  Should I keep adding events, or should I use a
> >>>> backup calendar until we figure out what's happening here?   
> >>>> Thanks!!
> >>>>
> >>>> Esther
> >>>>
> >>>>
> >>>> On 18Jan, 2008, at 12:40, Jeffrey Harris wrote:
> >>>>
> >>>>> Hi Esther,
> >>>>>
> >>>>>> I seem to be having sync issues again.  I'm getting the following
> >>>>>> error:  Recordset contains invalid data: could not apply EIM
> >>>>>> recordset 064636d2-c494-11dc-8b3a-fcd7d2d2fa00 due to invalid
> >>>>>> data: field duration is required (HTTP status 400), and it
> >>>>>> appears that this error has been going on since the 11:15a sync
> >>>>>> this morning.  The sync previous to that one at 10:21a seemed to
> >>>>>> have worked.  Since then, it seems each attempt has gotten the
> >>>>>> same message.  Let me know if you'd like me to try anything...
> >>>>>> thanks!
> >>>>>
> >>>>> Ouch, not sure what's causing this.
> >>>>>
> >>>>> Unfortunately, I missed you today, I was out yesterday, but in
> >>>>> today. Would you mind uploading your repository so I can take a
> >>>>> look at it?
> >>>>>
> >>>>> Sincerely,
> >>>>> Jeffrey
> >>>>> _______________________________________________
> >>>>> chandler-users mailing list
> >>>>> chandler-users at osafoundation.org
> >>>>> http://lists.osafoundation.org/mailman/listinfo/chandler-users
> >>>>
> >>>> _______________________________________________
> >>>> chandler-users mailing list
> >>>> chandler-users at osafoundation.org
> >>>> http://lists.osafoundation.org/mailman/listinfo/chandler-users
> >>> _______________________________________________
> >>> chandler-users mailing list
> >>> chandler-users at osafoundation.org
> >>> http://lists.osafoundation.org/mailman/listinfo/chandler-users
> >>
>